Máy nén khí tàu thủy MAS G 180-315 Atlas copco

Thông số kĩ thuật cơ bản

Lưu lượng FAD (l/s)             371 - 775 l/s 

Lưu lượng FAD (m³/h, cfm)  1336 - 2790 m³/h 

Áp suất làm việc                    6 - 13.8 bar(e) 

Công suất động cơ kéo          180 - 385 kW 

Lợi ích khách hàng

• Oustanding performance
  Several starter type: Star/Delta, Dol, Soft Starter, and VSD 
  (Variable Speed Drive) on request 
  State-of-the-art screw element with unique asymmetric rotor 
  profile and meticulous bearing selection
• Proven reliability
  Anti-vibration pads to absorb the vibrations and increase component lifetimeSmart unloader operated by gas forces, with less mechanical wear and optimum reliability throughout the compressor’s lifetime 
  Designed to run even in harsh conditions and up to 45°C ambient temperature
• Ease of operation User-friendly interface with intuitive navigation system to access all monitoring possibilities (safety devices, service schedule, general alarms etc.) 
  Small frame size (L * W * H) = 2500 *1250 *1954 mm 
  Ready-to-use package including oil and aftercooler, water separator, air inlet filter
• Cutting down cost Low service cost thanks to easy access to all service parts 
  Increased component lifetime and improved efficiency 
  Easy installation with flange and water connections located on the same side 

MAS GA110-355atlas copco

Thông số kĩ thuật cơ bản

Lưu lượng FAD (l/s)              241 - 777 l/s
Lưu lượng FAD (m³/h, cfm)   868 - 2797 m³/h
Áp suất làm việc                   6 - 14 bar(e)
Công suất motor kéo            110 - 385 kW

The harsh marine environment demands the most durable and most reliable products: you don’t want valuable equipment to break down during loading and discharge. MAS GA compressors guarantee you the lowest oil carryover content and lowest discharge temperature in the market. Built to last, they will give you unrelenting performance, unrivalled reliability, and avoid cargo discharge speed claims or off-hire claims. Through extensive testing on core components like the oil separator, oil filter, coolers and electric cubicle, MAS GA compressors tackle extreme duties as a daily challenge, and operate with low running costs and long service internals. Don’t go to sea without an Atlas Copco MAS GA compressor.

---

Customer benefits

• Optimizing efficiency Several starter types: Star/Delta, Dol and Soft Starter 
  Upon request : VSD, diesel and hydraulically driven

• Flexible installation Flanged air and water connection, on same side of unit for 
  easy installation 
  Marine motor with reduced starting current, avoiding stress on 
  generator system 
  Elektronikon (MKIV) regulation, ensuring reliable and safe operation 
  Control panel (MKIV) including hour counter, amp meter, 
  high-temperature outlet, motor overload, low cooling water, 
  motor heating on (lamp), auto operation sign, analog signals to 
  customer and general alarm

• Easy operation
  Voltage free contacts to customer installation (open-closed):automatic operation, general warning, general shut-down, load-unload, motor running and local-remote 
  Analog signals to customer installation (4-20 mA): outlet pressure and motor current

• Saving Space Small footprint (L x W x H): 3000 x 799 x 1850 mm 
  Frame-mounted, fully interconnected, no extra pipework 
  Including oil and aftercooler, water separator, air inlet filter 
  Without canopy, reducing equipment volume 

Máy nén khí tàu thủy Atlas copco MAS GA 5-90

• Units:
• Metric
• Imperial

Technical Specifications
Capacity FAD (l/s)	4.2 - 12 l/s
Capacity FAD (m³/h, cfm)	30 - 2797 m³/h
Working pressure	6 - 14 bar(e)
Installed motor power	5 - 385 kW

The harsh marine environment demands the most durable and most reliable products: you do not want critical equipment to break down at sea. That is why you need the Atlas Copco range of MAS compressors. Built to last, they will give you the performance and reliability you need. Through extensive testing on core components like the oil separator, oil filter, coolers and electric cubicle, MAS compressors tackle extreme duties as a daily challenge, and operate with low running costs and long service internals. Do not go to sea without an Atlas Copco MAS compressor.

---

Customer benefits

• Energy savings – MAS compressors incorporate the latest energy-saving screw design. Variable Speed Drive (VSD) versions further reduce energy consumption up to 35%.

• Flexible installation – A flanged air and water connection allows easy installation. All components are supplied fully interconnected with no extra pipework necessary. Your unit can be fitted straight on frames or a floor plate, bolted or welded.

• Easy operation – Efficient control and monitoring by the Elektronikon® system ensures reliable and safe operation. Amongst others, the control panel includes hour counter, amp meter, high-temperature outlet, motor overload, low cooling water, motor heating ON (lamp), auto operation sign, general alarm and 3.5” graphic display.

• Space saving – MAS compressors are characterized by a small footprint and can be outfitted with integrated refrigerant dryers and filters.
• 
  

Máy nén khí Atlas copcoGXe 7-22

• Units:
• Metric
• Imperial

Technical Specifications
Capacity FAD (l/s)	12.9 - 60.2 l/s
Installed motor power	7.5 - 22 kW
Working pressure	7.5 - 13 bar(e)

Atlas Copco’s oil-injected rotary screw GXe compressors are the powerful and reliable industrial screw compressors for small and medium sized industries. The GXe compressors are available in various versions (floor mounted, tank mounted, tank mounted with integrated dryer) to provide flexibility. Built from high-quality components and materials, they provide a reliable source of high-quality air in temperatures up to 46°C/115°F.

---

Features & benefits

• Reliability - The GXe series is designed, manufactured and tested in accordance with ISO 9001, ISO 14001 and ISO 1217. The screw compressor technology allows 100% continuous duty cycle and the reinforced frame eliminates resonance. GXe compressors are built for a long lifetime of reliable operation.

• Reduced energy costs - Our GXe compressors offer the low energy consumption and high efficiency of a rotary screw compressor. Compared to piston compressors that suffer from increased energy consumption over time, these screw compressors always provide high efficiency.

• Plug and play installation - In addition to boasting a minimum footprint, the GXe series discharges cooling air from the top, allowing placement against the wall or in a corner. The tank mounted GXe with built-in dryer reduces space requirements even further, making it ideal if you have limited space at your facility

• Easy maintenance - Service points are grouped together and are accessible through the removable panel. The spin-on oil separator and filter are designed to be easy to maintain.

• Silent operation - Atlas Copco supplies GXe compressors with full sound enclosures which reduce the sound levels. The rotary screw technology minimizes vibration, while optimized cooling air flow enhances quiet operation.

• Integrated air treatment - The tank-mounted GXe 2-11 FF compressors are available with an advanced built-in refrigerant air dryer. By cooling the compressed air and removing water before it can enter your compressed air network, it prevents rust in your compressed air piping and avoids damage to your air tools

Máy nén khí Atlas copco GR 110-200rotary screw compressors

• Units:
• Metric
• Imperial

Technical Specifications
Capacity FAD (l/s)	211 - 442 l/s
Capacity FAD (m³/h, cfm)	12.6 - 26.5 m³/h
Working pressure	12.75 - 20 bar(e)
Installed motor power	110 - 200 kW

Atlas Copco’s GR 110-200 oil-injected rotary screw compressors are ideal for high-pressure applications requiring a reliable air supply of 13 and 20 bar. The installation, operation and maintenance of these robust and reliable machines is kept simple. Their two-stage design ensures the most efficient operation at higher pressure. Our GR 110-200 compressors will cut your costs and enable smooth, continuous operation right across your production processes. You can choose from air- or water-cooled versions.

---

Customer benefits

• High reliability – The two-stage compression element features an asymmetric rotor profile you can rely on. Thanks to the extremely reduced load on bearings, rotors and gears, the element lifetime is long, ensuring low wear and tear and reliability at the lowest operating cost. 
• Advanced control monitoring - To maximize efficiency and reliability, the Elektronikon® controls the main drive motor and regulates system pressure within a predefined and narrow pressure band. The Elektronikon® controller can be adapted to your specific needs with extra sensors, digital contacts, fieldbus, Internet and SMS communication functions. In combination with the ES multiple compressor controller, the operation of your complete compressor room is optimized. 
• Easy installation – The GR 110-200 is truly plug-and-play. Simply put the machine on a flat floor, connect the power line and the compressed air outlet, and push the start button. 
• Minimal maintenance – GR 110-200 compressors are designed for trouble-free maintenance, with easily accessible oil and air filters and simple cooler cleaning procedures.

Máy nén khí Gas Atlas copco GG

• Units:
• Metric
• Imperial

Technical Specifications
Capacity FAD (l/s)	136 - 278 l/s
Capacity FAD (m³/h, cfm)	489 - 1000 m³/h
Working pressure	6 - 16 bar(e)
Installed motor power	90 - 132 kW
Inlet pressure up to	1.4 bar(a)
Capacity	450 - 920 Nm³/h
Gases handled	processed biomethane

Customer benefits

• Efficient capacity control – Variable Speed Drive can regulate the capacity of the compressor to keep inlet and outlet pressures constant, depending on the application.
• High efficiency and consistent performance – The GG’s highly efficient rotor profile maximizes the flow and minimizes the horsepower. Direct drive through a flexible coupling means no gear losses or wasted energy.
• Sturdy design – A triplex bearing arrangement has an L-10 calculated life of 130,000 hours. Superior shaft seal design and unparalleled precision manufacturing combine to ensure durable quality year after year. This makes the GG gas compressor the optimal solution for gas applications.
• Compact and easy to install – This single stage compressor takes up minimal floor space. Frame-mounted, the GG gas compressor comes as a complete all-in package which can easily be integrated in your process.

Máy nén khí Atlas copco GAR 5-37

• Units:
• Metric
• Imperial

Technical Specifications
Capacity FAD (l/s)	8.5 - 69 l/s
Capacity FAD (m³/h, cfm)	54 - 4140 m³/h
Working pressure	6 - 13 bar(e)
Installed motor power	5.5 - 37 kW
Working pressure	10 bar(e)

Atlas Copco’s GAR 5-37 oil-injected, air-cooled screw compressors are designed for dedicated railway applications. They are proven reliable, compact, low weight and low noise machines. The GAR 5-37 range has a long and successful history of meeting the most demanding compressed air requirements of main line locomotives, heavy-duty diesel locomotives, shunters, EMUs, DMUs, metros and LRVs.


The GAR screw compressor helps railway operators to achieve punctuality and reliability, while reducing operational costs.

---

Customer benefits

• Reliability – The GAR 5-37 range is a simple, highly reliable compressor package design. It incorporates a minimum of moving parts, a shaft-driven cooling fan, corrosion-resistant materials such as stainless steel and aluminum, and rigid and sturdy construction to withstand external vibrations, dust, exhaust gases, shock loads and projectiles. These compressors perform in temperatures from -40°C/-40°F to +50°C/+122°F and are designed to withstand the most extreme weather conditions.

• Maximum uptime – The GAR 5-37 range is characterized by long service intervals requiring an absolute minimum of maintenance. This guarantees an availability of more than 99%. Over a total lifetime of 30 years these compressors require only 2.5 hours of preventive maintenance per year, including overhaul.

• Low lifecycle cost – GAR 5-37 compressors are characterized by an extremely low lifecycle cost; a result of the high reliability and the long service intervals.

• Compact and low weight – The GAR 5-37 design is extremely compact as a result of the integrated fan concept. The fan is mounted on the drive motor shaft, eliminating separate cooling systems etc. A GAR compressor therefore needs little space for installation. The use of aluminum reduces the weight as much as possible.

• The Full Feature concept with integrated filters, unique SDR membrane dryers and aluminum air receivers will give you one single source to supply your system with clean dry air, without lost of energy due to high pressure drops and high purge air flows, compared to separate installations.

Máy nén khí Atlas copco GA 200-500 VSD

• Units:
• Metric
• Imperial

Technical Specifications
Capacity FAD (l/s)	211 - 1518 l/s
Capacity FAD (m³/h, cfm)	756 - 5472 m³/h
Working pressure	7.15 - 13.8 bar(e)
Installed motor power	185 - 522 kW

Atlas Copco’s GA 200-500 (VSD) oil-injected rotary screw compressors are designed and built to provide the maximum free air delivery at the lowest energy costs. The robust design ensures your process will function continuously even in the harshest conditions such as temperatures up to 46°C/115°F.

---

Customer benefits

• High reliability – Our GA 200-500 (VSD) compressors incorporate a superior oil-injected screw element based on innovative asymmetric rotor profiles and a high-quality drive system. All components are selected to ensure a long and trouble-free life of your compressor at the lowest operating cost. 
• Reduced energy costs – The GA Series’ superior screw elements are designed to give the optimum combination of maximum free air delivery for low energy consumption. The state-of-the-art compressor element is powered by Efficiency 1 class/NEMA EPAct electric motors, contributing to maximum compressor package efficiency. Beside this, the GA 315 VSD can offer additional energy savings of on average 35% by automatically adjusting the motor speed to the air demand. 
• Integrated air treatment – The GA Full Feature with highly energy-efficient integrated refrigerant dryer and air filter ensures the continuous supply of clean and dry air to extend the life of equipment, enhance system reliability and avoid costly downtime and production delays. 
• Advanced control monitoring – To maximize efficiency and reliability, the Elektronikon® controls the main drive motor and regulates system pressure within a predefined and narrow pressure band. The Elektronikon® controller can be adapted to your specific needs with extra sensors, digital contacts, fieldbus, Internet and SMS communication functions. In combination with the ES multiple compressor controller, the operation of your complete compressor room is optimized. 
• Easy installation – The integrated design includes internal piping, coolers, motor, lubrication and control system: all supplied as a ready-to-use package. Installation is fault-free and commissioning time is low. Simply plug and run.

Máy nén khí Atlas copco GA+90-160_GA110-160VSD

• Units:
• Metric
• Imperial

Technical Specifications
Capacity FAD (l/s)	4.9 - 854 l/s
Capacity FAD (m³/h, cfm)	1.3 - 335.9 m³/h
Working pressure	3.5 - 13.5 bar(e)
Installed motor power	55 - 290 kW

Efficient, reliable and built to last, the GA 90+-160+ / GA 110-160 VSD compressors are designed to provide high-quality compressed air even under harsh conditions. Every GA is designed, manufactured and tested to comply with ISO 9001, ISO 14001 and ISO 1217. They use the latest generation of Atlas Copco’s oil-injected screw element, ensuring a long and trouble-free life at the lowest possible operating cost. Engineered for reliable service, even in ambient temperatures up to 55°C/131°F and very harsh environmental circumstances, the GA takes reliability to a new level. Features such as Variable Speed Drive and energy recovery lead to significant reductions in energy use and cost.

---

Customer benefits

• Highest reliability – GA compressors incorporate the latest generation of Atlas Copco’s state-of-the-art compression elements based on innovative asymmetric rotor profiles, a high-quality drive system and heavy-duty air inlet filters. All these components are selected to operate continuously in the toughest conditions and at ambient temperatures up to 55°C/131°F. Together they ensure long and trouble-free life of your compressor at the lowest operating cost. 
• Maximum energy savings – The innovative design of our GA compressors (including screw element, motor, VSD-controlled cooling fans etc.) enables you to achieve substantial savings in your energy costs and overall compressor lifecycle costs. The GA Variable Speed Drive (VSD) reduces energy costs by a further 35% on average by automatically adjusting the air supply to your air demand. And to reduce your costs even further, install the optional energy recovery system. 
• Integrated air treatment – The GA Full Feature with highly energy efficient integrated refrigerant dryer and air filter ensures the continuous supply of clean and dry air to extend the life of equipment, enhance system reliability and avoid costly downtime and production delays. 
• Advanced control and monitoring – To maximize efficiency and reliability, the Elektronikon® controls the main drive motor and regulates system pressure within a predefined and narrow pressure band. The Elektronikon® controller can be adapted to your specific needs with extra sensors, digital contacts, fieldbus, Internet and SMS communication functions. In combination with the ES multiple compressor controller, the operation of your complete compressor room is optimized. 
• Easy installation – The integrated design includes internal piping, coolers, motor, lubrication and control system: all supplied as a ready-to-use package. Installation is fault-free and commissioning time is low. Simply plug and run.