Tiếng Việt
English
Dầu máy nén khí Atlas Copco là chất bôi trơn được thiết kế với việc lựa chọn đúng và chính xác các chất phụ gia tương tác trong dầu với tỷ lệ đã được nghiên cứu kĩ lưỡng để có được hiệu suất tối ưu. Các chất phụ gia không chỉ hỗ trợ các yêu cầu bôi trơn cơ bản của máy nén khí, Nó cũng đạt hiệu quả tương tác trong quá trình hoạt động máy nén.
Dầu máy nén khí trục vít Atlas Copco
Roto-Inject Fluid
Atlas Copco Roto-Inject Fluid is specially formulated to protect your GA-GX rotary screw compressors and neutralize pollution. It guarantees the longest lifetime, trouble free, with constant performance, at the best operating cost.
Years of experience on thousands of types of Atlas Copco equipment have proven Roto-Inject Fluid to match all lubrication demands in varied conditions. It boasts an extended service interval of up to 4 000 hours for operation in a mild environment. This is critical to achieve the best reliability and reduce the service lifetime cost.
Years of experience on thousands of types of Atlas Copco equipment have proven Roto-Inject Fluid to match all lubrication demands in varied conditions. It boasts an extended service interval of up to 4 000 hours for operation in a mild environment. This is critical to achieve the best reliability and reduce the service lifetime cost.
Roto-Xtend Duty Fluid
When your air compressors need to perform at top capacity, only the Atlas Copco lubricant is good enough. That’s why it pays to use Roto-Xtend Duty Fluid. Atlas Copco superior performance long life PAO oil, specifically developed for use in Atlas Copco oil injected screw compressors.
Based on synthetic hydrocarbons and special additives, our engineered
8 000 h lubricant has proven its ability to meet all lubrication demands under widely varying conditions. Roto-Xtend Duty Fluid increases compressor reliability, reduces lifetime operating costs and makes your equipment last longer.
Based on synthetic hydrocarbons and special additives, our engineered
8 000 h lubricant has proven its ability to meet all lubrication demands under widely varying conditions. Roto-Xtend Duty Fluid increases compressor reliability, reduces lifetime operating costs and makes your equipment last longer.
Roto-Food Grade Fluid
Roto-Foodgrade Fluid is a high performance fluid specifically designed for use in oil injected screw compressors operating in the food and beverage and packing industry. National and international regulations specify strict manufacturing standards regarding contamination risk management in this industry.
Our Roto foodgrade is based on a careful blend of synthetic fluids and additives that meet these stringent requirements , allowing for active Critical Control Points management (in an HACCP system) and providing increased customer confidence in the food products' safety.
Our Roto foodgrade is based on a careful blend of synthetic fluids and additives that meet these stringent requirements , allowing for active Critical Control Points management (in an HACCP system) and providing increased customer confidence in the food products' safety.
Dầu máy nén khí piston Atlas Copco
Piston Fluid
Piston compressors pose extreme demands to lubricants: the high compression temperature - possibly exceeding 150°C (300°F) - pressures up to 20 bar, condensation - typically during low cycle load - and dust contamination in installations that are not optimally maintained.
Traditional lubricants cannot cope with these extreme conditions, resulting in fast oil degradation, overheating and potentially irreversible damage and high repair costs. Therefore, high performing lubricants increase the equipment lifetime. The Atlas Copco Piston Fluid has been developed as a high resistance lubricant, withstanding severe conditions, with a long service interval and superior performance. Considering the low oil content in piston compressors, often less than 2 liters, the economy of lesser quality oils simply is not worth the risk.
Traditional lubricants cannot cope with these extreme conditions, resulting in fast oil degradation, overheating and potentially irreversible damage and high repair costs. Therefore, high performing lubricants increase the equipment lifetime. The Atlas Copco Piston Fluid has been developed as a high resistance lubricant, withstanding severe conditions, with a long service interval and superior performance. Considering the low oil content in piston compressors, often less than 2 liters, the economy of lesser quality oils simply is not worth the risk.
HiPER Fluid
HiPER Fluid is a premium quality reciprocating compressor lubricant,
which has been developed for and tested in Atlas Copco’s high pres-
sure reciprocating compressors (product lines Intermech and GreenField)
Applications:
Compressed Natural Gas Compressors
Industrial Gas Compressors
HiPER Fluid meets the most stringent qualification in order to increase
the performance and life time of your investment. The oil is specifically
blended to handle local variations in gas composition.
Automan Fluidwhich has been developed for and tested in Atlas Copco’s high pres-
sure reciprocating compressors (product lines Intermech and GreenField)
Applications:
Compressed Natural Gas Compressors
Industrial Gas Compressors
HiPER Fluid meets the most stringent qualification in order to increase
the performance and life time of your investment. The oil is specifically
blended to handle local variations in gas composition.
Automan piston compressors pose extreme demands to lubricants: the high compression temperature, possibly exceeding 150°C (300°F), pressures up to 20 bar, condensation - typically during low cycle load - and dust contamination in installations that are not optimally maintained.
Traditional lubricants cannot cope with these extreme conditions, resulting in fast oil degradation, overheating and potentially irreversible damage and high repair costs. Therefore, high performing lubricants increase the equipment lifetime. The Atlas Copco Automan Fluid has been developed as a high resistance lubricant, withstanding severe conditions, with a long service interval and superior performance.
Considering the low oil content in piston compressors, often less than 2 liters, the economy of lesser quality oils is simply not worth the risk.
Traditional lubricants cannot cope with these extreme conditions, resulting in fast oil degradation, overheating and potentially irreversible damage and high repair costs. Therefore, high performing lubricants increase the equipment lifetime. The Atlas Copco Automan Fluid has been developed as a high resistance lubricant, withstanding severe conditions, with a long service interval and superior performance.
Considering the low oil content in piston compressors, often less than 2 liters, the economy of lesser quality oils is simply not worth the risk.
Dầu bôi trơn Atlas Copco khác
Roto-Z
Roto-Z is a high quality lubricant, uniquely tailored to the specific requirements of the Atlas Copco Z-compressors. Its special formulation yields top performance and maximum lifetime of all moving parts. Reliability is safeguarded and equipment availability is maximal.
Roto-Z is cost-effective too: drain intervals are doubled in comparison
to conventional lubricants.
Roto-Z incorporates the functional benefits of a preservative mineral
oil, which allows for an extended on-site storage of several months.
Roto-Z is cost-effective too: drain intervals are doubled in comparison
to conventional lubricants.
Roto-Z incorporates the functional benefits of a preservative mineral
oil, which allows for an extended on-site storage of several months.
- Roto-Z (71kB, Pdf document) - Download
Roto-H Plus
Roto-H Plus is a unique lubricant, especially created for Atlas Cocpo oil-free centrifugal ZH compressors. The heavy-duty blend provides optimum lubrication of the compressor sleeve bearings. In addition, Roto-H Plus guarantees top performance and maximum durability of all other moving parts. This improved reliability translates into maximum equipment uptime.
It is a highly cost-effective lubricant: drain intervals can extend up to
24 000 hours* with only a 6-monthly oil analysis in between.
* Subject to normal operating conditions.
It is a highly cost-effective lubricant: drain intervals can extend up to
24 000 hours* with only a 6-monthly oil analysis in between.
* Subject to normal operating conditions.
Roto-M
Roto-M is your best safeguard for good hypoid gear lubrication . It is a heavy -duty , high-viscosity blend, formulated specifically for the gear boxes on Atlas Copco MD absorption air dryers.
Roto-M provides the high film strength required in hypoid gear applications. It minimizes wear and tear and guarantees optimum lubrication of the MD worm gear drive , under all operating conditions. Its superior reliability translates into maximum equipment uptime.
Roto-M provides the high film strength required in hypoid gear applications. It minimizes wear and tear and guarantees optimum lubrication of the MD worm gear drive , under all operating conditions. Its superior reliability translates into maximum equipment uptime.
Recip Oil
Recip Oil is a unique lubricant, especially created for Atlas Copco oil-free reciprocating compressors and boosters. The special blend provides optimum lubrication for high pressure applications and guarantees top performance and maximum durability of all moving parts. This improved reliability translates into maximum equipment uptime.
Part number: 29010001 SO (dầu 46)
29010002 SO (dầu 68)
Tuổi thọ: 8000h chạy máy
chú ý: Thông số trên đây là thông số tham chiếu của hãng Atlas copco có thể được thay đổi mà không báo trước.
Không có nhận xét nào: